With advanced sensor technology and microprocessor-based operation, GasPoint provides continuous monitoring for H2S, CO or combustibles. GasPoint's ease of use and cost of ownership advantages make it the ideal fixed system transmitter. No junction box connection is required, and sensors can be changed at will. GasPoint
will recognize the type of sensor installed, test it
and reset itself to the corresponding sensor type.
Features - Non-intrusive, one-person automatic calibration via single external pushbutton
- Equipped with three (3) 5-amp relay contacts--two (2) alarms and one (1) fault
- Normally energized/de-energized and latching/non-latching alarm relay functions
- Two (2) backlit alphanumeric LCDs advise all gas
hazards and operational faults, as well as instrument
and sensor statuses - Auto zero and auto span functions
- Backlight in low light (auto) and in alarm (auto)
- Extensive fault diagnostics
Self-Test - Full function sensor integrity test (daily; auto)
SPECIFICATIONS
MONITOR:
3-wire, 4-20 mA gas transmitter with advanced microcontroller-based circuitryPower Input: 12 to 32 volts DCOutput Current: Normal Operation: Isolated linear 4-20 mA outputCalibration Mode: Steady 3 mA (auto reset to normal operation)Fault Mode: 2 mA signal (and less)Power Consumption: Toxic Versions: 40 mA at 24 VDCCombustible Version: 100 mA at 24 VDCRelays: 50 mA per relay at 24 VDC
SENSORS:
Plug-in, smart sensors (H2S, CO, NH3, HCN, NO2, SO2, O2, CL2, LEL)Detection Type: Combustible gases: catalytic or IR; Toxic gases and Oxygen: electrochemicalSelf-Test:: Automatic daily self-test of sensor integrity and sensor lifeRelative Humidity: 5 to 95% RH non-condensingDrift: Zero: <5% per year; Span: <10% per year
CALIBRATION:
Non-intrusive, via pushbuttonAuto zero and auto span
DISPLAYS:
Two backlit liquid crystal displays
LCD 1
3-digit continuous readout of the gas present (ppm, % LEL or %v/v)
LCD 2
Alphanumeric diagnostic status displayAlarm Setpoints: Two setpoints: user-selectable
RELAY CONTACTS:
Three SPDT relays; 5 amps at 250 VACLOW/HIGH: Field selectable for normally energized/de-energized and latching/non-latchingFAULT: Normally energized and non-latching
TRANSMISSION RANGES:
Relay contacts not considered.
CONTROLS:
Calibration: Non-intrusive via external pushbuttonMAlarm Setpoints: Simple up/down pushbuttons with LCD readout of setpoints
PHYSICAL:
Size: 6.8 x 7 x 4.3 inches / 17 x 17.8 x 10.8 cm (approx.)Weight: 4.85 lb. / 2.2 kg (approx.)Transmitter: Nema 4, explosion-proof, anodized aluminum enclosure with mounting fl angesSensor: Stainless steel enclosure
WARRANTY:
Instrument: 2 years non-prorated; Sensor: 2 years full replacement warranty
Gas Detectors 
