Electronic Measurement Labs
BestInGasDetection.com "Yours in Life Safety"
Gas Detectors Fixed
Fixed
Fixed
4500 System
The 4500 is an advanced fixed detection system, which can monitor Flammable gas, Toxic gas, Oxygen and Fire. |
Active 8
The GMI Active 8 is a fixed gas detection system with up to 8 zone-able inputs. Designed specifically for the smaller facility, the system can monitor any combination of combustible and toxic gas. |
Biosystems ZoneGuard
The ZoneGuard is a microprocessor based fixed gas detection system designed to accept the input from a single oxygen, combustible or toxic sensor. |
BW CR4000
Entirely self-contained, the CR-4000 4-channel, 4-20mA, AC/DC controller provides continuous uninterrupted monitoring and of toxic gases, combustibles and oxygen hazards. The CR-4000 delivers 24 VDC power to any
4-20 mA transmitter. |
BW Gas Point
The self-contained GasPoint transmitter with internal alarm relays provides a 4-20 mA output signal and can be connected to any control system (DCS, PLC or controller). |
BW RRJ Series
The rugged, zero-maintenance RRJ Series transmitters for H2S come complete with sensor and provide a 4-20 mA signal that is compatible with any 4-20 mA controller, DCS or PLC. |
CO2 Multi-Monitor
The CO2 Multi Monitor is a fixed gas detection system with up to 8 sample inputs, designed to monitor gas in the range 0 to 5% CO2 using infra-red technology. |
Crowcon Nimbus
Infrared flammable gas detector
Nimbus is a Flameproof (Exd) infra-red flammable gas detector, which provides a cost effective solution for the protection of plant and personnel. |
Crowcon TXgard-IS+
Toxic and oxygen gas detector with display
TXgard-IS+ is a Intrinsically Safe (I.S.) toxic and oxygen gas detector with local LCD display. |
Crowcon Xgard
The Xgard range offers a comprehensive selection of fixed point gas detectors that meet the diverse requirements gas detection in industries throughout the world. Intrinsically Safe (I.S.) or Flameproof (Exd) versions are available for a wide range of app |
Crowcon Xsafe
Xsafe is a cost effective solution for flammable gas detection in safe areas such as boiler rooms, kitchens and commercial buildings. |
GfG 4100 DP Control Panel
The GMA 4100-DP continuously provides information on the measured dew point level, exceeded alarm thresholds and its operational status. |
GfG 4100/4400 Control Panel
The 4100 one-channel gas warning system and the 4-channel 4400 offer safe and reliable gas warning systems. |
GfG CC0238
An early warning for combustible gases in ambient conditions is the safest way to avoid life and property-threatening environments. Fixed gas detection systems allow an early recognition of combustible gases around the clock. |
GfG CC28
Wherever hazards are induced by combustible gases or vapors, the transmitter CC28 and GfG's proven controllers are the best solution for reliable surveillance. |
GfG CI 21
The charge carrier injection (CI 21) sensor is a progressive development to improve upon current ammonia refrigeration detection methods. With CI 21 technology sensor life is no longer limited to ammonia exposure levels. |
GfG CS21 Transmitter
The CS 21 transmitter uses the proven chemosorption detection principle for detection of toxic gases, vapors, and combustibles. The rapid response of the transmitter provides opportunity to take counter measures and thereby limit damages. |
GfG DynaGard 25 CO2
The Dynagard 25 Series accurately measures CO2 levels. The unit offers a local display, a horn / strobe, and a linear 4-20 mA output. |
GfG DynaGard 25 O2
The Dynagard 25 Series accurately measures oxygen levels. The unit offers a local display, a horn / strobe, and a linear 4-20 mA output. The Dynagard 25 Series offers a safe and reliable gas warning system. |
GfG Dynagard AutoCal
Dynagard AutoCal® monitors are single point detection instruments that accurately measure toxic gases and oxygen levels. Alarm lights on the front panel illuminate and an internal horn sounds when gas concentrations are exceeded. |
GfG EC23
GfG's EC 23 transmitter for detecting toxic gases in ambient air is an inexpensive gas detection solution for use in a wide variety of today's industrial applications. |
GfG EC28 Smart Transmitter
Wherever hazards are expected, the EC 28 transmitter and GfG’s proven monitoring systems are the right choice for reliable surveillance. |
GfG EC30 AutoCal
The EC 30 is an advanced transmitter for the detection of toxic gases and oxygen levels. This smart area monitor has an aluminum explosion proof housing with a stainless steel sensor cover that makes the EC 30 series suitable for the harshest environments |
Contact Us
668 Easton AveSomerset, NJ 08873PH 800-452-6822Fax 732-828-4912sales@emlinc.comservice@emlinc.comSERVICE RETURN FORMAdobe Acrobat .pdfMicrosoft Office .doc
We do not sell, rent or disclose your personal information to anyone! EVER!!!
Products at a glance...
WINTER SPECIALS!!!
V!SA (SPECIAL PRICING)
Call for Pricing |
Who's Online
We have 11 guests onlineEmployee Portal
